Setting the signal
en
M
Setting the signal
S e t t i n g t h e s i g n a l
1. Activate setting mode for signal volume
turn to Off
2. Set volume for button signals (depending on model)
press the 0 button until the required
volume is reached
3. Selecting volume of the information signals
turn one position to the right
28
turn one position
Press and hold ° C button + one
to the right
step clockwise
to step 3. or
press the 0 button until the
required volume is reached
Release the button
set to Off, setting mode for signal volume is
left
set to Off, setting mode for signal
volume is left