M
Setting the signal
S e t t i n g t h e s i g n a l
1. Activate setting mode for the signal volume
Turn to
Off.
$
2.a Set the volume for the button signals
Touch the 0 (Finish in) button until
the required volume is reached
2.b Selecting the volume for the information signals
Turn one position clockwise.
Turn one position
Touch and hold the °C (Temperature)
clockwise.
button + turn one position clockwise.
Go to step 2.b or
Touch the 0 (Finish in) button
until the required volume is
reached.
Setting the signal
Set to
Off, which exits setting mode
$
for the signal volume.
Set to
Off, which exits setting
$
mode for signal volume.
en
Release the but-
ton, and figure
appears in the
display.
27