Operating Positions - Bosch Professional MUM57860/05 Installation Manual

en Operating positions
5 Drive cover
To remove the drive cover, press on the
rear area and remove cover.
6 Drive for
– Continuous-feed shredder and
– Citrus press (optional accessory*).
When not in use, attach the drive cover.
7 Drive for tools (stirrer, whisk, kneading
hook) and mincer (optional accessory*)
8 Blender drive cover
9 Drive for blender (optional accessory*)
When not in use, attach the blender drive
cover.
10 Automatic cord winder
Bowl with accessories
11 Stainless steel stirring bowl
12 Lid
Tools
13 Professional flexi stirring whisk
14 Professional beating whisk
15 Kneading hook with dough deflector
16 Accessories bag
For storage of the tools and cutting discs.
Continuous-feed shredder
17 Pusher
18 Cover with filling shaft
19 Cutting discs
a Professional Supercut reversible
disc – coarse / fine
b Reversible shredding disc –
coarse / fine
c Grating disc – medium­fine
d Grating disc – coarse*
e Asian v egetable disc*
20 Disc holder
21 Housing with outlet opening
Blender*
22 Blender jug
23 Lid
24 Funnel
* If an accessory is not included in the
product package, it can be purchased via the
trade or customer service.
20

Operating positions

Fig. B:
Attention!
Before operating the appliance, attach the
tool / accessory to the correct drive and
in the correct position and place in the
operating position according to this table.
The swivel arm must be engaged in every
operating position.
Note
The swivel arm features an "Easy Armlift"
function which supports the upwards
movement of the swivel arm.
Selecting the operating position:
■ Press the Release button and move the
swivel arm. Support movement with your
hand.
■ Move the swivel arm until it engages in the
required position.
Drive
Position
1 7
2 7
3 6
9
4
7
* Insert / remove whisk, stirrer or kneading
hook. Add large quantities of ingredients.
Tool / Operating
Accessory speed
1­5
1­7
1­3
* –
3­7
3­5
5­7
5­7