Universal Repeater Screen - ZyXEL Communications WAP3205 User Manual

Chapter 8 Universal Repeater Mode
Table 23 Status Screen: Universal Repeater Mode
LABEL
CPU Usage
Memory Usage
System Setting
Configuration Mode
Summary
Packet Statistics
WLAN Station Status

8.6 Universal Repeater Screen

Use this screen to enter the SSID and select the wireless security mode used by
the wireless device to which you want to connect. Go to Configuration >
Wireless LAN > Universal Repeater to open the Universal Repeater screen.
The screen varies depending on security mode.
Note: To have wireless clients access or acquire an IP address from another access
point or wireless router (B) through the WAP3205 (A) in universal repeater
mode, you must set the channel number in the Wireless LAN > General
screen to be the same as the one on the wireless router or AP to which the
WAP3205 wants to connect.
86
DESCRIPTION
This displays what percentage of the WAP3205's processing ability is
currently used. When this percentage is close to 100%, the WAP3205 is
running at full load, and the throughput is not going to improve anymore.
If you want some applications to have more throughput, you should turn
off other applications (for example, using bandwidth management.
This shows what percentage of the heap memory the WAP3205 is using.
This shows the web configurator mode you are viewing - Expert.
Click Details... to go to the Monitor >
(Section 9.4 on page 92). Use this screen to view port status and packet
specific statistics.
Click Details... to go to the Monitor >
(Section 9.5 on page 94). Use this screen to view the wireless stations
that are currently associated to the WAP3205.
A
Packet Statistics screen
WLAN Station Status screen
B
WAP3205 User's Guide