Repeater Mode Status Screen - ZyXEL Communications WRE6606 User Manual

6.4 Repeater Mode Status Screen

Click to open the Status screen.
Figure 18 Status: Repeater Mode
The following table describes the labels shown in the Status screen.
Table 13 Status Screen: Repeater Mode
LABEL
Device Information
Host Name
Firmware Version
Sys OP Mode
LAN Information
MAC Address
IP Address
IP Subnet Mask
Default Gateway
Chapter 6 Repeater Mode
DESCRIPTION
Select a number of seconds or None from the drop-down list box to refresh all
screen statistics automatically at the end of every time interval or to not
refresh the screen statistics.
Click this button to refresh the status screen statistics.
This is the WRE6606's system name you configure in the Maintenance >
General screen.
This is the firmware version and the date created.
This is the device mode (Section 3.1.1 on page
set - Repeater Mode.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's gateway IP address.
WRE6606 User's Guide
33
19) to which the WRE6606 is