C
H A P T E R
6.1 Overview
The WAP3205 is set to access point mode by default. In this mode your WAP3205
bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See
the figure below for an example.
Figure 27 Wireless Internet Access in Access Point Mode
Note: See
Chapter 4 on page 31
Access Point mode.
6.2 What You Can Do
• Use the Status screen
about your WAP3205.
• Use the LAN screen
WAP3205 acting as an access point.
• Use the Wireless LAN screens
wireless settings and wireless security between the wireless clients and the
WAP3205.
6.3 What You Need to Know
See
Chapter 4 on page 31
WAP3205 as an access point.
WAP3205 User's Guide
Access Point Mode
for an example of setting up a wireless network in
(Section 6.4 on page
(Chapter 11 on page
115) to set the IP address for your
(Chapter 10 on page
for a tutorial on setting up a network with the
6
63) to view read-only information
97) to configure the
61