9 System
9.1 Maintenance
9.1.1 Restart
This function enables you to restart the CPE. Settings take effect only after the CPE restarts. To
restart the CPE, perform the following steps:
1.
Choose System>Maintenance.
2.
Click Restart. As shown in Figure 9-1.
The CPE then restarts.
9.1.2 Factory Reset
This function enables you to restore the CPE to its default settings.
To restore the CPE, perform the following steps:
1.
Choose System>Maintenance.
2.
Click Factory Reset. As shown in Figure 9-2.
The CPE is then restored to its default settings.
Figure 8-3
Figure 9-1