Table of Contents
Advertisement
2. Set DOS to Enable.
3. Click Submit. As shown in Figure 5-24.
6 VPN Setting
This function enables you to connect the virtual private network (VPN).
To connect the VPN, perform the following steps:
1.
Choose VPN Setting.
2.
In the VPN Setting area, enable VPN.
3.
Select a protocol from Protocol drop-down list.
4.
Enter Username and Password.
5.
Click Submit.
6.
You can view the status in VPN Status area. As shown in Figure 6-1.
Figure 5-24
Figure 6-1
Advertisement
Table of Contents
