Table of Contents
Advertisement
9.2.3 Online Upgrade
This function is designed for FOTA. If you have set the FOTA settings, you can click check to check
whether there is a new version for the CPE.
To perform an upgrade, perform the following steps:
1.
Choose System>Version Manager.
2.
In the Online Upgrade area, click check.
3.
The software upgrade starts. After the upgrade, the CPE automatically restarts and runs the
new software version. As shown in Figure 9-7.
During an upgrade, do not power off the CPE or disconnect it from the computer.
9.3 Module Manager
This function enables you to upgrade the ODU software version of the CPE to the latest version. It
is recommended that you upgrade the software because the new version, certain bugs have been
fixed and the system stability is usually improved.
9.3.1 Viewing Version Info
To view the version info, perform the following steps:
3.
Choose System>Module Manager
4.
In the Version Info area, you can view the product name and software version. As shown in
Figure 9-8.
Figure 9-7
Figure 9-8
Advertisement
Table of Contents
