Omron V680S-HMD64-EIP User Manual page 156

Section 7
Host Communications Specifications
 Reader/Writer Operation Errors
Error code name
Unfixed operation mode error
User setting error
Multi-Reader/Writer execution
error
 System Errors
Error code name
System startup errors
System memory error
Profile error
Hardware faults
IC error
Configuration memory
error
 Device Information
The following table lists the device information that indicates the Reader/Writer in which the error
occurred.
These codes are set in the Response Information 1 field in the response area.
Device information
0000 hex
0100 hex
0200 hex
0300 hex
0400 hex
0500 hex
0600 hex
0700 hex
RFID System
154
User's Manual
(EtherNet/IP TM )
Error code
The control signal was not stable when the Reader/Writer was started. A
8001 hex
record is stored only in the system error log.
An error was detected in user configuration memory when the Reader/
Writer was started. A record is stored only in the system error log.
The classification of the setting is given in attached information 1.
8002 hex
0000 0001 hex: Network setting
0000 0002 hex: RF Tag communications setting
0000 0003 hex: Multi-Reader/Writer setting
A set value was detected when the Reader/Writer was started that
prevents execution of multi-Reader/Writer operation.
The reason for the error is given in attached information 1.
8003 hex 0000 0001 hex: The combination of the Multi-Reader/Writer Mode and
the communications option prevented execution.
0000 0002 hex: This Reader/Writer has the same IP address as the
Slave Reader/Writer.
Error code
An error was detected in system memory. A record is stored only in the
F001 hex
system error log.
An error was detected in the profile data. A record is stored only in the
F002 hex
system error log.
F011 hex An error was detected in an IC in the Reader/Writer.
An error was detected when accessing configuration memory.
F012 hex
An error occurred in the local Reader/Writer.
• An error occurred in the destination Reader/Writer when copying data.
• An error occurred in Slave Reader/Writer No. 1 for multi-Reader/Writer operation.
An error occurred in Slave Reader/Writer No. 2 for multi-Reader/Writer operation.
An error occurred in Slave Reader/Writer No. 3 for multi-Reader/Writer operation.
An error occurred in Slave Reader/Writer No. 4 for multi-Reader/Writer operation.
An error occurred in Slave Reader/Writer No. 5 for multi-Reader/Writer operation.
An error occurred in Slave Reader/Writer No. 6 for multi-Reader/Writer operation.
An error occurred in Slave Reader/Writer No. 7 for multi-Reader/Writer operation.
Description
Description
Description