Omron V680S-HMD64-EIP User Manual page 151

Setting item
Originator device (PLC)
Target device (Reader/Writer)
Requested packet interval (RPI)
• If I/O memory addresses are specified for the communications areas, the information in the communications areas
will be cleared when the operating mode of the PLC changes unless addresses in the CIO Area, which are
maintained, are specified.
• The following assembly object is required to specify instances when the EDS file is not used.
Parameter name
Instance ID
If you connect to an OMRON master, the maximum data size for one tag data link connection depends on the model of
the master. Use the sizes in the following table for reference.
EtherNet/IP master
NX701 CPU Unit
NJ-series CPU Unit
Built-in EtherNet/IP function on CJ2H-series CPU Unit 1,444 bytes
Built-in EtherNet/IP function on CJ2M-series CPU Unit 1,280 bytes
EtherNet/IP Unit
Input tag sets
Input connection types
Output tag sets
Output connection types
Output tag sets
Input tag sets
Set value
100 Output connection (40-byte tag set and tags)
101 Output connection (264-byte tag set and tags)
102 Output connection (520-byte tag set and tags)
103 Output connection (1,032-byte tag set and tags)
110 Input connection (40-byte tag set and tags)
111 Input connection (264-byte tag set and tags)
112 Input connection (520-byte tag set and tags)
113 Input connection (1,032-byte tag set and tags)
Host Communications Specifications
Description
Tag set name on PLC [40 to 1,032 bytes]
Cannot be changed (point to point connection).
Tag set name on PLC [40 to 1,032 bytes]
Cannot be changed (point to point connection).
Input_11 [40 to 1,032 bytes]
Output_10 [40 to 1,032 bytes]
User specified (2.0 to 10,000 ms, default: 10.0 ms)
Remarks
Maximum data size per
connection
1,444 bytes 1,032 bytes
600 bytes 520 bytes
1,032 bytes
1,032 bytes
1,444 bytes 1,032 bytes
Section 7
Recommended data size
setting for tag or tag set.
RFID System
User's Manual
(EtherNet/IP TM )
149