Menu #3 - Remote Start Options - Viper 7900 Installation Manual

menu #3 - remote start options

FEATURE ONE-CHIRP SETTING (DEFAULT)
Engine checking ON
3-1
Engine checking TACH
3-2
Run time: 12 minutes (1)
3-3*
Parking lights flashing
3-4
Crank time: 0.6 seconds (1)
3-5
Voltage check - high
3-6
Short Run/Turbo–1 min. (1)
3-7
Activation pulse count–1
3-8
3-9 2
nd
Acc state during wait to start: OFF
3-10
2
3-11
nd
Anti grind: ON
3-12
Diesel timer Wait-to-Start input (1)
3-13*
Timer mode—Timed Starts
3-14
Run Time (Timer Mode) 12 minutes (1)
3-15**
*NOTE: The Bitwriter® can set 1-90 seconds. For feature 3-3 it can also set time for 1-60 minutes
**NOTE: The Bitwriter® can set 1-16 minutes.
© 2006 Directed Electronics—all rights reserved
minutes
Ignition/Acc output: ignition
status output: Normal (1)
TWO-CHIRP SETTING
Engine checking OFF
Engine checking VOLTAGE
Run time: 24 (2) or 60 (3)
Parking lights constant
0.8 (2), 1.0 (3), 1.2 (4), 1.4 (5),
1.6 (6), 1.8 (7), 2.0 (8), 4.0 (9) sec.
Voltage check - low
3 (2), 5 (3), 10 (4) min.
Activation pulse count: 2
Accessory
ON
Rear defogger: latch 10 min. (2)/
pulse (3)
Anti grind: OFF
Timed 15 (2), 30 (3), 45 (4) seconds
Temperature Starts
3 (2), 6 (3), 9 (4) minutes
3