Viper 5101 Owner's Manual page 36

Viper remote start keyless entry owner's guide
Hide thumbs Also See for 5101:
Table of Contents

Advertisement

Remote Start
Press
. The parking lights turns on (if connected). The vehicle starts
and runs for the programmed duration.
Rear Defogger
Press
four-times, and then press
The parking lights flash 4 times confirming activation of the defogger
output.
To disable the remote start system
Move the shutdown toggle switch to the Off position.
1
Location of Shutdown Toggle Switch___________________
Valet Mode
Press
two-times and then
on solid to indicate the system is in valet. The same sequence on the
remote can be used to exit valet made. The LED turns off when valet
mode is exited.
Valet take-over
1.
Before turning Off the engine, press and release the
Then wait a few seconds.
2.
Turn the ignition key to the Off position.
3.
Exit the vehicle and lock the doors with the remote.
The engine will remain running until the programmed time elapses
or a shut-down input is received.
36
(only after remote start is On.)
. The LED on the control center comes
A U
X
© 2008 Directed Electronics. All rights reserved.
2
3
4
5
6
button.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents