Making Half-Tone Prints (Tint Mode) - Ricoh VT2100 Series Operating Instructions Manual

OPERATION

Making Half-tone Prints (Tint Mode)

Press the Economy/Tint key to
1
select Tint mode.
Set your originals on the expo-
2
sure glass or in the optional
document feeder.
Make sure that the Master Mak-
3
ing indicator is lit and then press
the Start key. Check the image
position of the trial or proof print.
If the image position is not correct,
adjust it using the Image Position
keys ( see page 21) or the side
plate fine adjusting dial (
22).
Enter the number of prints using
4
the Number keys.
43
see page