Ricoh VT2100 Series Operating Instructions Manual page 77

The beeper sounds after the first
8
original is on the master. Set the
second original face down.
Make sure that the Master Mak-
9
ing indicator is lit and then press
the Start key. Check the image
position of the trial or proof print.
If the image position is not correct,
adjust it using the Image Position
keys ( See page 21) or the side
plate fine adjusting dial. (
22.)
Enter the number of prints re-
A
quired using the Number keys.
Make sure that the Print indicator
B
is lit and then press the Start
key.
See page
OPERATION
70