Placing A New Roll Of Tape In The Tape Dispenser (Option) - Ricoh VT2100 Series Operating Instructions Manual

Placing A New Roll Of Tape In The Tape
Dispenser (Option)
Make sure that the main switch is turned on and the tape power switch is off.
.
Open the cover of the tape dis-
1
penser.
.
As shown, put the roll in the dis-
2
penser.
Make sure that the tape is installed in
the proper direction. If it is not in the
correct direction, the tape dispenser
will not work correctly.
.
Feed the leading edge of the roll
3
in the dispensing slot until it
stops.
Push the tape as far as possible
through the slot.
REPLENISHING SUPPLIES
124