Erasing Edge Margins (Edge Erase) - Ricoh VT2100 Series Operating Instructions Manual

Erasing Edge Margins (Edge Erase)

If you want to erase edge margins of a book original, follow the steps below.
As a default setting, the paper sizes and directions that can be used are as fol -
lows:
Metric version:
Inch version:
If you want to use other size originals, you can register the size using Service
Program mode.
The margin width to be erased can be adjusted with Service Program mode.
See page 107.
Press the Edge Erase key.
1
To cancel this mode, press the Edge
Erase key again.
Press the "<" or ">" key to select
2
the paper size and direction.
When you reach the desired pa-
3
per size and direction, press the
Enter key.
; ;
B4 , A4 , A5
;
8 " x 14" , 8
1/2 1/2
See page 107.
: ; : ;
, A5 , B5 , B5
;
" x 11" , 5 " x 8
1/2 1/2
OPERATION
; :
" , 5 " x 8 "
1/2 1/2
34