Table of Contents
Advertisement
Status
The output from the finisher is
curled and a paper misfeed has
occurred with the finisher.
Windows 95/98/Me/2000/NT
4.0:
The computer does not recog-
nize the installed printer op-
tions.
Note
❒ If you cannot solve the problem by taking the above actions, contact your
sales or service representative.
Possible Causes, Descriptions, and Solutions
A paper misfeed may have occurred because of curled paper
in the output tray. If the paper output is curled, remove the
paper from the paper tray and load it again after turning it
over.
If the connection to the printer is not bidirectional, the com-
puter cannot automatically recognize the installed printer
options.
Options might not be configured correctly. In this case spec-
ify which options you have installed using the printer driver.
Reference
For more information about configuring options for the
printer driver, see "Installing the PCL 6/5e Printer Driv-
er", "Installing the PostScript Printer Driver" in the Setup
Guide.
Other Printing Problems
4
63
Advertisement
Table of Contents
