Table of Contents
Advertisement
Troubleshooting
Possible Cause
If you print using the Post-
Script driver on a network,
data is received by the
printer, but is not printed.
4
58
Solutions
❖ ❖ ❖ ❖ Windows 95/98/Me
On the [PostScript] tab of the Printer Properties, click [Advanced]
and then clear both [Send CTRL+D before job] and [Send CTRL+D
after job].
❖ ❖ ❖ ❖ Windows 2000
On the [Device Settings] tab of the Printer Properties, select [No]
for both [Send CTRL-D Before Each Job:] and [Send CTRL-D After
Each Job:].
❖ ❖ ❖ ❖ Windows NT 4.0
Open the [Advanced] tab of the Printer Properties. From [Post-
Script Options], select [No] for both [Send CTRL-D Before Each job:]
and [Send CTRL-D After Each job:].
Advertisement
Table of Contents
