Table of Contents
Advertisement
Troubleshooting
Messages
Remove Paper
from Duplex Unit
Remove Paper
from Staple Tray
Remove Paper
Mailbox Tray #
4
Remove Paper
Shift Tray
Remove Paper
Standard Tray
Replace
Maintenance Kit
46
Description
There is still paper in AD380
(duplex unit).
There is paper in the stack unit
of the finisher.
The CS370 (mailbox) tray # is
full.
# : Tray Number
The shift tray of the finisher is
full.
The standard output tray is
full.
It is time to replace parts in-
cluded in Maintenance Kit
Type 270.
Comments
Remove paper from AD380
(duplex unit).
Remove paper from the stack
unit of the finisher.
Important
❒ Remove the paper from the
output tray before it be-
comes full. If you leave pa-
per in the output tray, it
can cause a paper misfeed.
Remove paper from the CS370
(mailbox) tray.
Important
❒ Remove the paper from
output tray before it be-
comes full. If you leave pa-
per in the output tray, it
can cause a paper misfeed.
Remove paper from the finish-
er tray.
Important
❒ Remove the paper from the
output tray before it be-
comes full. If you leave pa-
per in the output tray, it
can cause a paper misfeed.
Remove paper from the out-
put tray.
Important
❒ Remove the paper from
output tray before it be-
comes full. If you leave pa-
per in the output tray, it
can cause a paper misfeed.
Replace Maintenance Kit Type
270. For more information
about how to replace the kit,
see the "Maintenance Kit Type
270 Replacement Guide" that
comes with the kit. After re-
placing the kit, clean the regis-
tration rollers. ⇒ P.84
"Cleaning the Registration Roll-
er"
Advertisement
Table of Contents
