Table of Contents
Advertisement
6 Center your original face down on the Origi-
nal Table. Slide the original straight into the
copier until the copier pulls it in.
7 After copying has finished, hold the original
with one hand, press the Clear/Stop key, then
remove the original.
Notes
p To cancel copying, press the Clear/Stop key. The copier finishes the operation in progress, and
delivers the copy and the original. Press the Clear/Stop key again to remove the original.
p To call off on-going copying, for example, when you have inserted a wrong blueprint, press the
Roll Paper Cut key. The machine interrupts the operation in progress, and delivers the copy
and the original. Press the Clear/Stop key to remove the original.
Energy
Set
Saver
Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter
Darker
Emergency Stop
SM059
Clear Modes/
Energy Saver
Program
Clear/Stop
21
Advertisement
Table of Contents
