Ricoh FW740 Manual page 12

1a. & 1b. Locks
2. Front Cover
3. Original Guide
4. Original Table
5. Operation Panel
6. Rear Table
7. Roll Feeder(option)
8. Paper Guides(option)
9. Bypass Table
10. Roll Feeder Covers
11. Table(option)
12. Main Switch
13. Copy Stacker (option)
Squeeze both locks to open the unit. Open the unit to empty the
used toner bottle and to remove jammed paper.
Open the cover(and the unit) to access the toner cartridge.
Use the guide to keep the original going straight as you feed the
original into the copier.
Place your original here, face down, and the original will come out
from here after it is copied. If you want to copy a stiff original
that can't be bent, use the Rear Table (see 6).
See page8.
Place stiff originals here, face down.
Feeds paper from a roll to the copier.
Use the guides to keep the copy paper going straight as you feed
the paper into the copier.
Open this table if you are copying to sheets, changing the toner
cartridge, or if you have to open the copier.
Open these covers to change the roll of paper and to clear paper
jams.
Holds your copier and the Roll Feeder.
Turn to start the copier and off when you're done for the day.
The copier will need about 5 minutes to warm up, if it's been
turned off for a long time.
Delivers copy in the front of the machine or stock it in the back.
5