Table of Contents
Advertisement
Adjusting the Fusing Temperature Manually
1 Press the Copy Media key to turn on the
"Vellum" or "Film" indicator that you want.
2 Hold down the Copy Media key for at least
3 seconds.
The "Lighter Copy" display will show the
current fusing temperature. The unlit indica-
tor shows the current temperature.
3 Press the Lighter key to decrease the tem-
perature, and press the Darker key to increase
the temperature.
The number of temperature levels available
depends on the paper type:
Plain paper
Vellum
Film
4 After you have finished the setting, press the Copy Media key.
5 Choose any copy settings you require, then start copying.
Notes
p The new fusing temperature for the selected paper type is cleared when you press the Clear
Modes key or turn off the main switch.
26
: 1234567
: 1234
: 1234
Energy
Set
Saver
Original
Wait
Lighter Copy
Vellum
Film
Copy Media Lighter
Darker
Emergency Stop
Clear Modes/
Energy Saver
Program
Clear/Stop
Advertisement
Table of Contents
