If sheet paper is jammed at the paper exit
R CAUTION:
R
Notes
p If the paper or original gets stuck in the copier, remove both the original and paper.
1 Squeeze the locks on each side of the copier
and lift the moddle unit between the Original
Table and the Bypass Table.
2 Open the fusing unit cover.
3 Slowly pull the paper out. If there are scraps
left inside, open the inner cover, wait for the
copier to cool, and remove the scraps.
52
• The fusing unit can be very hot. Do not touch any parts under the
fusing cover. If necessary, wait until the fusing unit has cooled down.
SM065
SM048
SM049