Table of Contents
Advertisement
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
4)
Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
5)
Press qw to select [OK], and press the <ENTER> button.
Note
f When using a DHCP server, confirm that the DHCP server is running.
f Consult your network administrator regarding the IP address, subnet mask, and default gateway.
f When [Art-Net SETUP] is set to [ON(2.X.X.X)] or [ON(10.X.X.X)], [WIRED LAN] cannot be selected.
[PROJECTOR NAME]
Change the projector name. Enter the host name if it is required when using a DHCP server, etc.
1)
Press as to select [PROJECTOR NAME].
2)
Press the <ENTER> button.
f The [PROJECTOR NAME CHANGE] screen is displayed.
3)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 12 characters can be entered.
4)
After entering the projector name, press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Note
f The factory default setting of the projector name is "NAMExxxx". xxxx is the four digit number assigned for each product.
[NETWORK STATUS]
Display the network information of the projector.
1)
Press as to select [NETWORK STATUS].
2)
Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
[MAC ADDRESS]
[ADMINISTRATOR ACCOUNT]
Set the user name and password of the administrator account.
[PASSWORD POLICY]
Display a policy about the password of the administrator account.
1)
Press as to select [ADMINISTRATOR ACCOUNT].
190 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[ON]
[OFF]
Enter the IP address if a DHCP server is not used.
Enter the subnet mask if a DHCP server is not used.
Enter the default gateway address if a DHCP server is not used.
Displays the status of use of the DHCP server.
Displays the [IP ADDRESS].
Displays the [SUBNET MASK].
Displays the [DEFAULT GATEWAY].
Displays the address of the preferred DNS server.
Displays the address of the alternate DNS server.
Displays the [MAC ADDRESS] of wired LAN.
Acquires the IP address automatically if a DHCP server exists in the
network where the projector is to be connected.
Set [IP ADDRESS], [SUBNET MASK], and [DEFAULT GATEWAY] if
a DHCP server does not exist in the network where the projector is
to be connected.
Advertisement
Table of Contents
