[Network] Menu; [Digital Link] - Panasonic PT-RZ16KU Operating Instructions (Functional Manual)

[NETWORK] menu

On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 86) for the operation of the menu screen.

[DIGITAL LINK]

Perform the setting and operation regarding the DIGITAL LINK.
[DIGITAL LINK MODE]
Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1) Press as to select [DIGITAL LINK].
2) Press the <ENTER> button.
f The [DIGITAL LINK] screen is displayed.
3) Press as to select [DIGITAL LINK MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[DIGITAL LINK]
[LONG REACH]
[ETHERNET]
r Possible communication modes
l: Communication possible
―: Communication not possible
Setting
[AUTO]
[DIGITAL LINK]
[LONG REACH]
[ETHERNET]
*1 Communication via a twisted-pair-cable transmitter is not available. Connect the projector to the network directly.
Note
f For the signal with resolution of 1 920 x 1 200 dots or less, the maximum transmission distance is 100 m (328'1") when connected with the
DIGITAL LINK communication method.
f For the signal with the resolution exceeding 1 920 x 1 200 dots, the maximum transmission distance is 50 m (164'1").
f The maximum transmission distance when connected with the long-reach communication method is 150 m (492'2"). In this case, the signal
that the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock frequency 148.5 MHz).
f When the communication method of the twist-pair-cable transmitter is set to long reach, the projector will connect with long-reach
communication method when [DIGITAL LINK MODE] is set to [AUTO]. To connect with the optional DIGITAL LINK Switcher (Model No.:
ET-YFB200G) with the long-reach communication method, set [DIGITAL LINK MODE] to [LONG REACH].
f Connection will not be made correctly if the twist-pair-cable transmitter is not supporting the long-reach communication method even if
[DIGITAL LINK MODE] is set to [LONG REACH].
[DIGITAL LINK STATUS]
Display the DIGITAL LINK connection environment.
1) Press as to select [DIGITAL LINK].
2) Press the <ENTER> button.
f The [DIGITAL LINK] screen is displayed.
3) Press as to select [DIGITAL LINK STATUS].
188 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Switches the communication method automatically to DIGITAL LINK, long reach, or Ethernet.
Fixes the communication method to DIGITAL LINK.
Fixes the communication method to long reach.
Fixes the communication method to Ethernet.
Video transfer
(100 m (328'1"))
For DIGITAL LINK
For long reach
For Ethernet
Communication possible
Video transfer
(150 m (492'2"))
―
l
―
l
― ―
―
l
―
l
― ―
Ethernet RS-232C
l l
l l
―
l *1
l l
l l
―
l *1