Ricoh MFSP213SFNW1 Manual page 89

• To cancel scanning, press the [Scanner] key, and then press the [Clear/Stop] key. The scan files
are discarded.
• You can configure the machine to scan documents in black and white, color, or grayscale by
changing the [Scanning Mode] setting under scan settings. For details, see page 135 "Scanner
Features Settings".
• You can also specify a destination using the One Touch buttons, [Pause/Redial] key.
• If the [Limitless Scan] setting under scan settings is enabled, you can place originals on the
exposure glass repeatedly in a single scan procedure. For details, see page 135 "Scanner
Features Settings".
• If [File Type] under scan settings is set to [Multi-page], you can scan multiple pages to create a
single PDF or TIFF file containing all pages. However, if the file format is JPEG, a single-page file
will be created for every page scanned. For details, see page 135 "Scanner Features Settings".
• If paper is jammed in the ADF, the scan job will be discarded. Remove the jammed paper and scan
the entire originals again. For the direction to remove paper jammed in the ADF, see page 210
"Paper Feed Problems".
Specifying the scan destination using the One Touch buttons or [Pause/Redial] key
This section describes how to specify a destination using the following keys:
• One Touch buttons
Use these to specify destinations registered as Quick Dial entries.
• [Pause/Redial] key
Press this to specify the last used destination as the destination for the current job.
Using the One Touch buttons
Press the One Touch button to which the desired Quick Dial entry is registered.
Press the [Shift] key to use the Quick Dial entries Nos. 5 to 8.
opal-p2_mf2_com_user_guide_00142100_eng.xml
DCT878
Basic Operation
89
Draft 2014/01/07