Ricoh MFSP213SFNW1 Manual page 162

7. Configuring the Machine Using the Control Panel
• Africa
Country
Selects the country in which the machine is used. The country you specify determines the time and
date display format and the default values of the fax transmission-related settings.
Make sure to select the country code correctly. Selecting a wrong country may cause failures in fax
transmissions.
The default value for this setting is the country code you have specified during the Initial Setup,
which is required after turning on the machine for the first time.
Reset Settings
Be sure not to clear the settings by mistake.
• Reset All Settings
Resets the machine's settings to their defaults except the following: language for the screen,
country setting, network settings, and fax Quick Dial/Speed Dial destinations.
Press [Yes] to execute. Press [No] to exit to the previous level of the menu tree without clearing
the settings.
• Reset Network Settings
Resets the network settings to their defaults.
Press [Yes] to execute. Press [No] to exit to the previous level of the menu tree without clearing
the settings.
• Clear Address Book
Clears the fax Quick Dial/Speed Dial destinations.
Press [Yes] to execute. Press [No] to exit to the previous level of the menu tree without clearing
the destinations.
Shortcut to Function
Assigns one of the following functions to the [Shortcut to Func.] key on the control panel.
Default: [ID Card Copy Mode]
• ID Card Copy Mode
Press the key to switch to the ID card copy mode.
• Fax Immediate TX
Press the key to switch to the [Immediate TX] menu.
• Select Scanner Dest.
Press the key to switch to the scanner destination selection menu.
Admin. Tools Lock
Specifies a four-digit password for accessing the [Address Book], [Network Settings], and [Admin.
Tools] menus.
162
opal-p2_mf2_com_user_guide_00142129_eng.xml
Draft 2014/01/07