Client Bridge Navigation Panel - ZyXEL Communications BG-418N v1 User Manual

Chapter 4 Modes
Table 23 Status Screen (Client Bridge Mode) (continued)
LABEL
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
Interface Status
Interface
Status
Rate
Summary
Packet Statistics

4.5.2 Client Bridge Navigation Panel

Use the menu in the navigation panel to configure NBG-418N features in Client Bridge Mode.
The following screen and table show the features you can configure in Client Bridge Mode.
Figure 38 Menu: Client Bridge Mode
54
DESCRIPTION
This field displays your NBG-418N's present date and time.
This displays what percentage of the NBG-418N's processing ability is currently
used. When this percentage is close to 100%, the NBG-418N is running at full
load, and the throughput is not going to improve anymore. If you want some
applications to have more throughput, you should turn off other applications.
This shows what percentage of the heap memory the NBG-418N is using.
This displays the NBG-418N port types. The port types are: LAN and WLAN.
For the LAN port, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the
WLAN is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when
the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and N/A when the WLAN is disabled.
Use this screen to view port packet statistics.