18.1 Overview
The Sys OP Mode (System Operation Mode) function lets you configure select the device operation
mode: Router, Access Point, Client Bridge or Universal Repeater.
See
Chapter 4 on page 35
18.2 General Screen
Use this screen to select how you connect to the Internet.
Figure 103 Maintenance > Sys OP Mode > General
The following table describes the labels in the General screen.
Table 58 Maintenance > Sys Op Mode > General
LABEL
System Operation Mode
Router
Access Point
C
for more information on which mode to choose.
DESCRIPTION
Use this mode if you want to use routing functions such as LAN DHCP, NAT, firewall and
so on on the NBG-418N (N). The NBG-418N has separate LAN and WAN network IP
addresses.
Use this mode if you already have a Router (R) in your network and you want to bridge
all wired and wireless network connections.
HAPTER
Sys OP Mode
1 8
137