Web Interface Tutorials; Web Interface Overview; Wired Network Setup; Setting Up A Dsl Connection - ZyXEL Communications AX Series User Manual

5.1 Web Interface Overview

This chapter shows you how to use the Zyxel Device's various features.
•

Wired Network Setup

• WiFi Network Setup
• USB Applications
• Network Security
• Internet Calls
• Device Maintenance
5.2 Wired Network Setup
This section shows you how to set up a DSL or Ethernet Internet connection with the Broadband screens.
The screens vary by the connection mode, encapsulation type and IP mode (IPv6 or IPv4) you select.
Set the Zyxel Device to Routing mode or Bridge mode on this connection as follows:
• Use Routing mode if you want the Zyxel Device to use routing mode functions such as NAT, Firewall, or
DHCP Server. You will need to reconfigure your network if you have an existing router.
• Use Bridge mode to pass the ISP-assigned IP address(es) to your devices connected to the LAN port.
All traffic from the Internet passes through the Zyxel Device directly to devices connected to the LAN
port. Use this mode if you already have a router with complete routing functions in your network.

5.2.1 Setting Up a DSL Connection

This tutorial shows you how to set up a DSL Internet connection using the Web Configurator on DSL
routers (see
If you connect to the Internet through a DSL connection, use the information from your Internet Service
Provider (ISP) to configure the Broadband screens.
Go to Network Setting > Broadband and then the following screen appears. Click Add New WAN
1
Interface.

Web Interface Tutorials

Section 1.1 on page 19).
AX/DX/EX/PX Series User's Guide
C
H A P T E R
81
5