Status Screen (Universal Repeater Mode) - ZyXEL Communications BG-418N v1 User Manual

Note: Wait while the NBG-418N restarts, then log in to the Web Configurator again.

4.4.1 Status Screen (Universal Repeater Mode)

Click on Status. The screen below shows the status screen in Universal Repeater Mode.
Figure 34 Status Screen (Universal Repeater Mode)
The following table describes the labels shown in the Status screen.
Table 21 Status Screen (Universal Repeater Mode)
LABEL
Device Information
System Name
Firmware Version
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP
DESCRIPTION
This is the System Name you enter in the Maintenance > System >
General screen. It is for identification purposes.
This is the current firmware version of the NBG-418N.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role.
Chapter 4 Modes
49