Table of Contents
Advertisement
Enable PCIE1
The optional settings are: [Disabled]; [Enabled]; [Auto].
PCIE1- ASPM
Use this item to control ASPM support for the PEG device. This has no effect if
PEG is not the currently active device.
The optional settings are: [Disabled]; [Auto]; [ASPM L0s]; [ASPM L1]; [ASPM
L0sL1].
Memory Configuration
Press [Enter] to make settings for the following sub-item:
Memory Frequency Limiter
Use this item to set maximum memory frequency selection in Mhz.
The optional settings are: [Auto]; [1067]; [1333]; [1600]; [1867].
3-9 Boot Menu
37
Advertisement
Table of Contents
