JETWAY JNF9QU-Q87 Technical Manual page 34

(immediately) to 120 minutes.
Active Page Threshold Support
Use this item to enable or disable support for RST with small partition.
Hybrid Hard Disk Support
Use this item to enable or disable Hybrid Hard Disk Support.
RapidStart Display Save/Restore
Use this function to enable or disable RapidStart Display Save/Restore function.
 PCH-FW Configuration
Press [Enter] to view ME information and make settings for 'Firmware Update
Configuration'.
 Firmware Update Configuration
Press [Enter] to make settings for 'ME FW Image RE-Flash'.
ME FW Image RE-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
 AMT Configuration
Use this item to configure Active Management Technology parameters.
Press [Enter] to make settings for the following sub-items:
Intel AMT
Use this item to enable or disable Intel Active Management Technology BIOS
extension.
BIOS Hotkey Pressed
Use this function to enable or disable BIOS Hotkey Press function.
MEBx Selection Screen
Use this function to enable or disable MEBx Selection Screen function.
Hide Un-Configure ME Confirmation
Use this function to enable or disable Hide Un-Configure ME without password
Configuration Prompt function.
MEBx Debug Message Output
Use this function to enable or disable MEBx Debug Message Output function.
Un-Configure ME
Use this function to enable or disable Un-Configure ME without password function.
Amt Wait Timer
Use this item to set time to wait before sending ASF_GET_BOOT_OPTIONS.
29