JETWAY JNF9QU-Q87 Technical Manual page 31

Use this item to enable or disable system wake on alarm event. When set as
[Enabled], system will wake on the hour/min/sec specified.
PS2 KB/MS Wakeup
Use this item to enable or disable PS2 KB/MS wakeup from S3/S4/S5 state.
*This item will only show when 'EUP Support' is set as [Disabled].
USB S3/S4 Wakeup
Use this item to enable or disable USB S3/S4 wakeup.
*This item will only show when 'EUP Support' is set as [Disabled].

Trusted Computing
Press [Enter] to make further settings for Trusted Computing and view current
TPM status information.
Configuration
Security Device Support
Use this item to enable or disable BIOS support for security device. O.S, will not
show Security Device. TCG EFI protocol and INT1A interface will not be available.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], TPM State will show up for user to enable or disable
Security Device.
TPM State
Use this item to enable or disable Security Device.
The optional settings: [Disabled]; [Enabled].
Your computer will reboot during restart in order to change state of the device.
Pending Operation
The default setting is [None].
Current Status Information
Current TPM Enabled Status and TPM Active Status will show on the screen.
 CPU Configuration
Press [Enter] to view current CPU configuration and make settings for the following
sub-items:
Hyper-Threading
The optional settings: [Disabled]; [Enabled].
[Enabled]: for Windows XP and Linux (OS optimized for Hyper-Threading
Technology).
26