Table of Contents
Advertisement
3. INITIAL SETTINGS
Fish size
Calibration =
value (%)
Transducer
[Time Offset]: Enter the time difference between UTC and local time to display the
local date and time. This setting is valid when [Date Time] is set to [Local] on the [Data]
menu.
3.7
Stabilization Setting
The [Stabilization] menu compensates for the effects of heaving, and requires a Sat-
ellite Compass
Note: This menu is not available when there is no data from the Satellite Compass
1. Press the MENU/ESC key to open the menu.
2. Rotate the ENTER knob to select [System], then push the knob.
3. Rotate the ENTER knob and select [Stabilization], then push the knob.
Stabilization
Stabilization Sensor
Stabilization Area
[HF]
TD fore-aft
TD port-stbd
ANT TD height
[LF]
TD fore-aft
TD port-stbd
ANT TD height
[Stabilization]: Turn heaving compensation on or off. Turn it on when seas are
rough, to get stable pictures regardless of sea conditions. When heaving stabili-
zation is turned on, the symbol (
screen. If the antenna position of the Satellite Compass
message shown below appears. Push the knob to erase the message, then set
the antenna position for the Satellite Compass
4. Set the antenna position for the Satellite Compass
• TD fore-aft: Distance (m) from antenna to transducer on the fore-aft line.
• TD port-stbd: Distance (m) from antenna to transducer on the port-stbd line.
TVR + RVR
10
CM265LH
CM599LH
A
0.197
0.562
™
.
On
SC-50
15m
0.0m
0.0m
0.0m
0.0m
0.0m
0.0m
Antenna to Transducer
distances (bow-stern,
port-starboard, height)
are not set, Have a
FURUNO technician
adjust your settings.
Yes
30
A
- 1 ×100
20
PM111LH
0.343
Stabilization Sensor
Stabilization Area
[HF]
TD fore-aft
TD port-stbd
ANT TD height
[LF]
TD fore-aft
TD port-stbd
ANT TD height
) appears at the upper left corner on the
™
.
™
.
SC-30
15m
0.0m
0.0m
0.0m
0.0m
0.0m
0.0m
™
has not been set, the
™
.
Advertisement
Table of Contents
