Table of Contents
Advertisement
3. ADJUSTMENTS
3.5
Input/Output Signal
The GP-170 can receive or output various navigation data.
Before selecting data to output, confirm what data the external equipment requires.
Output necessary data only. Outputting unnecessary data can cause receiving prob-
lems at the external equipment.
3.5.1
Talker
All data transmitted by marine electronics equipment is prefixed with a two-character
code which tells external equipment what equipment is transmitting data. This two-
character code is called the talker. The GP-170 contains the talkers GP and GN.
3.5.2
Input/Output sentence
Output sentence of IEC 61162-1 Ed.3/4 and NMEA 0183 Ver. 1.5/2.0
Sentence
AAM
ALC
ALF
ALR
APA*
APB
ARC
BOD
BWC
BWR
BWW
DTM
GBS
GGA
GLL
GNS
GRS
GSA
GST
GSV
HBT
MSK
MSS
POS
3-10
Wayopint arrival alarm
Cyclic alert list
Alert sentence
Set alarm state
Autopilot sentence A
Magnitude of cross track error, direction to steer, arrival alarm, bearing or-
igin to destination
Autopilot sentence B
Magnitude of cross track error, direction to steer, arrival alarm, bearing to
waypoint
("Heading to steer to destination waypoint data" not used)
Alert command refused
Bearing origin to destination
Bearing and distance to waypoint - great circle
Bearing and distance to waypoint - rhumb line
Bearing waypoint to waypoint
Datum reference
GNSS satellite fault detection
Global positioning system (GPS) fix data
Time of fix, latitude, longitude, quality indicator, number of satellites in
use, DOP, altitude, geoidal separation
("age of dgps data" and "differential reference station ID")
Geographic position - latitude/longitude
GNSS fix data
GNSS range residuals
GNSS DOP and active satellites
GNSS pseudorange noise statistics
GNSS satellites in view
Heartbeat supervision sentence
MSK receiver interface
MSK receiver signal status
Device position and ship dimensions report or configuration command
Description
Advertisement
Table of Contents
