Statistics - ZyXEL Communications NWA1120 Series User Manual

Chapter 5 Monitor
Click Monitor > Logs.
Figure 15 Logs
The following table describes the labels in this screen.
Table 6 Logs
LABEL
Display
E-Mail Log Now
Refresh
Clear Log
#
Time
Message
Source

5.4 Statistics

Use this screen to view read-only information, including 802.11 Mode, Channel ID, Retry Count and
FCS Error Count. Also provided is the "poll interval". The Poll Interval field is configurable and is
used for refreshing the screen.
50
DESCRIPTION
Select a category of logs to view. Select All Log to view logs from all of the log
categories that you selected in the Configuration > Log Settings screen.
Click E-Mail Log Now to send the log screen to the e-mail address specified in the Log
Settings page (make sure that you have first filled in the E-mail Log Settings fields in
Configuration > Log Settings).
Click Refresh to renew the log screen.
Click Clear Log to delete all the logs.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming packet.
NWA1120 Series User's Guide