ZyXEL Communications NWA1120 Series User Manual page 80

Chapter 6 Wireless LAN
Table 18 Security: WPA/WPA2 for Access Point (continued)
LABEL
Reauthentication
Time
Enable Group-Key
Update
Back
Apply
Cancel
6.6.2.2 Wireless Client
Use this screen to employ WPA or WPA2 as the security mode for your NWA that is in wireless client
operating mode. Select WPA or WPA2 in the Security Mode field to display the following screen.
Figure 32 Security: WPA for Wireless Client
80
DESCRIPTION
Specify how often wireless stations have to resend user names and passwords in order to
stay connected.
Enter a time interval between 100 and 3600 seconds. Alternatively, enter "0" to turn
reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the reauthentication
timer on the RADIUS server has priority.
Select this option to have the NWA automatically disconnect a wireless station from the
wired network after a period of inactivity. The wireless station needs to enter the user
name and password again before access to the wired network is allowed.
Enter a time interval between 100 and 3600 seconds.
Click Back to return to the previous screen.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
NWA1120 Series User's Guide