ZyXEL Communications NWA1120 Series User Manual page 113

To change your NWA's log settings, click Configuration > Log Settings. The screen appears as
shown.
Figure 57 Log Settings
The following table describes the labels in this screen.
Table 33 Log Settings
LABEL
E-mail Log Settings
Mail Server
Mail Subject
Send Log to
NWA1120 Series User's Guide
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via
e-mail.
Type a title that you want to be in the subject line of the log e-mail message that the
NWA sends.
Logs are sent to the e-mail address specified in this field. If this field is left blank, logs
will not be sent via e-mail.
Chapter 10 Log Settings
113