Preparing The Remote Control - Panasonic SC-MAX7000 Operating Instructions Manual

SC-MAX5000
Connect the speaker
cables to the terminals
of the same color.
4
Connect the AC power supply cord.
Do not use any other AC power supply cords except
the supplied one.
SC-MAX9000 SC-MAX7000
For Australia and New Zealand
Insert the AC power
supply cord up to
a point just before the
round hole.
To household AC outlet
Except for Australia and New Zealand
If the power plug does not fit your socket, use the
supplied power plug adapter.
SC-MAX5000
To household
AC outlet
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.

Preparing the remote control

Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
For others
,
To household
AC outlet
7