Panasonic SC-MAX7000 Operating Instructions Manual page 5

SC-MAX7000 SC-MAX5000
Put the speakers so that the tweeter is on the outside.
Keep your speakers more than 10 mm from the main unit
for ventilation.
SC-MAX7000
Setup 1
█ Stacking the speakers
Stack the speakers with the
supplied speaker stacking pins.
Press down the stacking pins
and the speaker until it is
secured in position.
Stacking pin
Install the supplied bracket as shown below to
secure the speakers.
Tweeter
Screw
Bracket
Setup 2
You can put the speakers in a vertical position as well as
on a shelf.
█ Attaching the speaker feet
Before placing the speakers (SB-MAF7000 &
SB-MAG7000) in a vertical position, lay the
speakers on top of a protection layer and paste the
supplied speaker feet to the bottom of the
speakers.
SC-MAX5000
Note:
• More than one person is required to move, tilt or carry the
speakers.
CAUTION!
• Be careful when babies
or children are near.
• Do not stack the
speakers.
Speaker feet
Protection layer
(not supplied)
Tweeter
5