Siemens SIMATIC ET 200SP Manual page 10

Product overview
2.1 Properties
Properties
The TM Count 1x24V technology module has the following properties:
● Technical properties
● Supported encoder/signal types
● Supported system functions
10
– One channel
– Interfaces:
24 V encoder signals A, B and N from sourcing, sinking or push pull encoders and
sensors
24 V encoder supply output, short-circuit proof
DI0, DI1 and DI2 digital input signals
DQ0 and DQ1 digital output signals
L+ supply voltage
– Count range: 32 bits
– Monitoring of encoder signals for wire break
– Hardware interrupts configurable
– Input filters for suppression of interferences at encoder inputs and digital inputs can be
configured
– 24 V incremental encoder with and without N signal
– 24 V pulse encoder with direction signal
– 24 V pulse encoder without direction signal
– 24 V pulse encoders for up & down pulses
– Isochronous mode
– Firmware Update
– Identification data I&M
Technology Module TM Count 1x24V (6ES7138‑6AA00‑0BA0)
Manual, 10/2013, A5E33002339-AA