Preface - Siemens SIMATIC ET 200SP Manual

Preface

Purpose of the documentation
This manual includes module-specific information on wiring, diagnostics and the technical
specifications of the technology module.
General information regarding design and commissioning of the ET 200SP is available in the
ET 200SP system manual.
The counting and measuring functions of the TM Count 1x24V technology module are
described in more detail in the Counting, Measurement and Position Detection
(http://support.automation.siemens.com/WW/view/en/59709820) function manual.
Conventions
Please observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product and on the section of the documentation to which particular attention
should be paid.
Security information
Siemens provides automation and drive products with industrial security functions that
support the secure operation of plants or machines. They are an important component in a
holistic industrial security concept. With this in mind, our products undergo continuous
development. We therefore recommend that you keep yourself informed with respect to our
product updates. Please find further information and newsletters on this subject at:
http://support.automation.siemens.com.
To ensure the secure operation of a plant or machine it is also necessary to take suitable
preventive action (e.g. cell protection concept) and to integrate the automation and drive
components into a state-of-the-art holistic industrial security concept for the entire plant or
machine. Any third-party products that may be in use must also be taken into account.
Please find further information at: http://www.siemens.com/industrialsecurity
Technology Module TM Count 1x24V (6ES7138‑6AA00‑0BA0)
Manual, 10/2013, A5E33002339-AA
3