Editing The Project Name; Changing A Project Name Later; Editing The Name Of The First Session; Loading Projects - Tascam HS-4000 Owner's Manual

5. After you complete making settings touch the
C R E A T E P R O J E C T button.
NOTE
・ If a project with the same project name already exists, the
P R O J E C T button appears gray and you will not be able to create a new
project. If this happens, change the project name.
・ On screens 2 and 3, press the
P R E V
screen.
6. When the confirmation message appears in a pop-up,
press the O K button.
When project creation completes, the Home Screen
reopens.
NOTE
・ Immediately after creation, the new project becomes the current
(loaded) project.
・ The letter "C" appears in the
to the left of the name of the current project name on the
screen.

Editing the project name

1. Touch the
P r o j e c t N a m e
P R O J E C T screen to open the
■ Date button
Touch this button to change the project name to the date
currently set for the unit in a "yyyy–mm–dd" format.
NOTE
・ If the same project name or session name already exists, an underscore
(_) followed by a number that has not been used is added.
・ After pressing the
D a t e button to change the name to the date, you can
further edit the name on this screen.
■ Project name display area
The input project name is shown.
The maximum number of characters allowed is indicated
by a yellow background.
■ Character buttons
Use these to input the project name.
■ BS button
Use this to erase the character to the left of the cursor.
■ DEL button
Use this to erase the character to the right of the cursor.
■ Shift button
Touch this to switch between numerals and symbols and
uppercase and lowercase Roman letters.
■ Caps button
Use to input uppercase letters.
■ Space button
Use to input a space.
C R E A T E
button to return to the previous
icon, which is also highlighted yellow,
P R O J E C T
button on the C R E A T E
P R O J E C T N A M E screen.
■ <- / -> buttons
Use these to move the cursor.
■ Enter button
Touch this to confirm the input name.
NOTE
When the P R O J E C T N A M E screen is open, you can also use an external
keyboard to input names.
2. Touch the Enter button on the
or press the DATA dial to confirm the project name.
Character input limitation
The maximum number of characters allowed is indicated by the
yellow background in the project name display area. Excess
characters have a gray background and are discarded when the
E n t e r button is pressed.

Changing a project name later

1. Select the project that you want to change on the
P R O J E C T screen. The background of the selected
project name appears yellow.
2. Touch the
M E N U button on the
open a pull-up menu.
3. Touch the
E D I T N A M E button in the pull-up menu to
open the P R O J E C T N A M E
NOTE
When multiple projects are selected, the
menu is not available.
4. Input the project name using the procedures
described above.
5. Touch the
E n t e r button on the
or press the DATA dial to confirm the project name
and return to the P R O J E C T

Editing the name of the first session

Touch the S e s s i o n N a m e button on the
screen to open the 1 s t S E S S I O N
Follow the same procedures as in "Editing the project name" on
page 35 to change the name.
NOTE
S ession names cannot be changed later.

Loading projects

1. Press the PROJECT key on the front panel to open the
P R O J E C T screen.
TASCAM HS-4000
5 – Projects
P R O J E C T N A M E screen
P R O J E C T screen to
screen.
E D I T N A M E button in the pull-up
P R O J E C T N A M E screen
screen.
C R E A T E P R O J E C T
screen, as shown below.
35