Playback; Project/Session/Take Selection; Setting Input Monitoring; Setting The Online Function - Tascam HS-4000 Owner's Manual

8 – Take mode

Playback

Project/session/take selection

1. Press the PROJECT key on the front panel to open the
P R O J E C T screen.
NOTE
You can also touch the session/take name area on the Home Screen to open
the screen.
P R O J E C T
2. Touch the e button for the project that contains the
take you want to load to open the session selection
screen. If it is not the current project, a pop-up
window appears confirming that you want to load it.
Touch the O K button.
3. Touch the e button for the session that contains the
take you want to load to open the take selection
screen. If it is not the current session, a pop-up
window appears confirming that you want to load it.
Touch the O K button.
NOTE
To load a take from the current session, instead of steps 1–4 above, touch the
session name button at the top right of the project screen or touch the take
name button on the Home Screen, and touch the
pull-down menu to open the take selection screen for the current session.
4. Select the take that you want to load.
5. Touch the
M E N U button in the take selection screen to
open the pull-up menu.
52
TASCAM HS-4000
6. Touch the
7. When a confirmation message appears in the pop-up
NOTE
You can also press the e button for a take to load it.
In this case, no pop-up window appears, and the take selection screen
remains open after loading (the Home screen does not reopen.)

Setting input monitoring

Turn input monitoring OFF for the channels (tracks) to be played
back. When input monitoring is ON for a channel, sound will be
input through that channel's audio input.
1. Touch the
2. If input monitoring is on for any playback channels (

Setting the online function

Refer to "Online functions" on page 89 for details about making
settings for the online outputs.

Playback control

Press the PLAY key to start playback.
Press the PAUSE key to pause playback.
Press the PLAY key again to resume playback.
Press the STOP (RETAKE) key to stop playback.
Press the. [MARK.] key or / [MARK/] key to
switch takes.
T A K E L i s t button in the
Press and hold the m [
backward or forward.
L O A D button in the pull-up menu.
window, touch the O K button or press the DATA dial.
When loading completes, the Home Screen opens.
R E C / M O N button on the Home Screen to open
a pull-up with R E C and M O N buttons.
buttons appear blue), touch those
them off (turning them gray).
] or , [
M O N
M O N buttons to turn
] key to search