Table of Contents
Advertisement
Display
( ) Q
O PA
This display shows various types of operation information,
including CD disc information, deck operation modes, and
menu status.
Lights when a tape is being played back or
Tape PLAY
(
recording.
(Tape-running indicator) Shows the direction of a
)
˙/¥
tape during playback or recording.
Lights when the unit is in standby
Tape PAUSE (π)
Q
mode for tape playback or recording.
Lights during tape recording or recording
Tape REC
W
standby mode.
The tape counter value is incre-
Tape Counter display
E
mented when the tape is moving from left to right, and
decremented when it moves from right to left (See "Tape
counter" on page 33 for more details).
Tape Level meter
Displays the playback level and the
R
input level of the source device for recording operation.
TAPE, CD
In the CD-TAPE CONT PLAY mode (con-
T
tinuous CD/tape playback), on of these will flash during
playback.
INPUT 2
This is always displayed except when record-
Y
ing with the
PHONO
key.
LINE 2, DISC display
U
available for
INPUT 2
(Tape deck).
liNe 2:
a signal source is connected to
a signal source is connected to internal CD drive.
Disc:
When dubbing a tape to a CD-RW, the indica-
DUB 1, 2
I
tor "
" lights up. When dubbing a CD-RW to a tape,
Dub 1
indicator "
Dub 2
" lights up.
Either
Counter display
O
both indictors are off, the time mode is set to show the
elapsed time of the current track.
Disc information display NO TOC
P
does not contain TOC (Table of Contents) data.
CD-R
or
CD-RW
lights up when a disc with TOC data
is loaded.
CD PLAY
(
) Lights during disc playback.
¥
A
2 – Features of the CC-222SL@#
W
E
DF G
H J
K
S
Shows the different sources
LINE INPUT 2
.
or
is lit. When
TOTAl
ReMAiN
Lights when a disc
CD
1 – Introduction
R
L
(
) Lights during playback or recording
CD PAUSE
S
π
standby mode.
Lights during disc recording or recording
CD REC
D
standby mode.
Lights when the SYNC recording mode is on.
SYNC
F
REPEAT, A-B display
G
on, "
" is lit. When the A-B Repeat function is
RePeAT
on, "
RePeAT
" and "
"B-point" is entered.
SINGLE, RANDOM, PROGRAM display
H
on the playback mode selected. When all the indicators
are off, Continuous playback mode is on.
Character display
J
message, time, and operation status are displayed.
CD Level meter
K
level when recording.
MUSIC CALENDER
L
up; played back tracks disappear from the screen. When
there are more than 20 tracks available for playback, the
"
" indicator lights up.
OVeR
Lights when the Auto Space function is on.
A·SPACE
:
A·TRACK
Lights when the Auto Track function is on.
Z
The indicator blinks when Time mode is selected.
INPUT 1
This is always displayed except when record-
X
ing with the
PHONO
OPTICAL, COAXIAL, LINE 1, PHONO, TAPE display
C
Shows the different sources available for
drive).
Input source is connected to
OPTicAl:
cOAXiAl:
Input source is connected to
liNe 1:
Input source is connected to
Input source is connected to
PhONO:
Input source is connected to internal tape deck.
TAPe:
,
T
Y
UI
: ZX C
When the Repeat function is
A-b
" are lit. "
A-b
" also blinks until a
Depending
Disc or track information, menu,
Displays the playback or input source
Available tracks for playback light
key.
INPUT 1
OPTICAL
COAXIAL
LINE 1
.
.
PHONO
TASCAM CC-222SL
MK
(CD
.
.
13
II
Advertisement
Table of Contents
