Extraordinary Maintenance - Smeg SOP6900TP Manual

Programmed Pyrolytic function
Like for the cooking functions, it is also
possible to set an end time for the
Pyrolytic function.
To set a programmed Pyrolytic function:
1. Turn the function knob to the position
The text
duration of the Pyrolytic cycle
appear on the display.
2. Use the increase
keys to set the Pyrolytic cycle duration.
3. Press the clock key
The text
alternated with the previously set Pyrolytic
function duration added to the current time.
4. Press the or
end time.
5. Press the clock
seconds to activate the function.
The display shows the current time and the
symbol flashes to indicate that the
appliance is waiting to start the Pyrolytic function
and will finish at the time set by the user.

Extraordinary maintenance

Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-abrasive
sponge and wash with lukewarm water.
Replacing the internal light bulb
Power voltage
Danger of electrocution
• Unplug the appliance.
• Wear protective gloves.
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray support frames.
91477A143/A
alternated with the
and decrease
.
will appear on the display
key to set the function
key or wait for a few
3. Use a tool (e.g. a spoon) to remove the bulb
cover.
.
will
Take care not to scratch the enamel of
the oven cavity wall.
4. Slide out and remove the light bulb.
Do not touch the halogen light bulb
directly with your fingers, use an
insulating material.
5. Replace the light bulb with one of the same
type (40 W).
6. Refit the cover. Ensure the moulded part of
the glass (A) is facing the door.
7. Press the cover completely down so that it
attaches perfectly to the bulb support.
CLEANING AND MAINTENANCE - 47