Table of Contents
Advertisement
The dot between the hours and the minutes
stops flashing.
To change the time, hold down the
increase key
at the same time for two seconds,
then set the time.
Oven switching-on (manual cooking)
Depending on the recipe, the food can
be placed in the oven cavity either
immediately or after preheating.
To switch on the oven:
1. Select the cooking function using the
function knob.
2. Select the temperature using the
temperature knob.
After a few seconds, the cooking stage starts.
Preheating stage
Cooking itself is preceded by a preheating
stage, which allows the appliance to heat to the
cooking temperature more quickly.
This stage is indicated by the thermostat
indicator light switching on and the symbol
flashing on the display.
At the end of preheating:
• the thermostat indicator light switches off;
• the symbol
on the display remains
steadily lit;
• the appliance beeps;
• cooking starts automatically.
Once preheating is complete, the food can be
placed in the oven cavity (if provided for in the
recipe).
End of a manual cooking
To end a cooking:
• Turn the function knob and/or the
temperature knob to the 0 position.
Minute minder timer
The minute minder timer does not stop
the cooking operation but rather informs
the user when the set time has run out.
The minute minder timer can be activated at any
time.
1. Press the clock key
The display shows the text
38 - USE
and decrease key
.
.
2. Use the increase
keys to set the required minutes.
3. Press the clock
seconds to activate the Minute minder timer
function.
The current time and the symbol
on the display.
Press the clock
remaining time on the display.
At the end of the minute minder timer time:
• the symbol
flashes;
• a buzzer sounds, which can be switched off
by pressing any key on the display.
The minute minder timer can be set from
1 minute to a maximum of 23 hours and
59 minutes.
Timed cooking
Timed cooking is the function which
allows a cooking operation to be
started and then ended after a specific
length of time set by the user.
1. Select a cooking function using the function
knob.
2. Select a temperature using the temperature
knob.
3. Press the clock
seconds to start the preheating stage.
4. Press the clock key
the display shows the values for setting the
minute miner timer
5. Press the clock key
On the display the flashing
text
appear, alternating with the
current time.
6. Use the increase
keys to set the required minutes of cooking.
It is not possible to set a cooking time of
more than 13 hours.
7. Press the clock
seconds to activate the function.
The current time and the
and decrease
key or wait for a few
will appear
key to see the
key or wait for a few
.
again.
symbol and the
and decrease
key or wait for a few
and
symbols
91477A143/A
Advertisement
Table of Contents
