Table of Contents
Advertisement
The display shows the
alternated with the Pyrolytic cycle
duration (factory set to 2 hours and 30 minutes).
2. Use the increase
keys to set the Pyrolytic cycle duration.
Recommended pyrolytic cycle duration:
• Light dirt: 2:00
• Medium dirt: 2:30
• Heavy dirt: 3:00
3. Press the clock
entered.
After a few seconds, the preheating of the
Pyrolytic cycle starts:
• the symbol
on the display and the
Pyrolytic cycle indicator light switch on;
• the display shows the time left until the end
of the entire cleaning process
• the symbol
on the display flashes.
A few minutes after the preheating starts, the
symbol comes on (steadily lit) to indicate that the
door is locked by a device that prevents the
door from being opened.
It is not possible to select any function
once the door lock device has been
activated.
If the function knob is turned to another
function, the display shows an error
message
Cleaning process
At the end of preheating, the Pyrolytic cycle
starts automatically:
• the thermostat indicator light turns off (turning
on and off regularly indicates that the
temperature inside the oven cavity is being
kept constant);
• on the display, the
(steadily lit) to indicate that the Pyrolytic
cycle is in progress;
• The Pyrolytic cycle indicator light and the
and
symbols on the display remain
46 - CLEANING AND MAINTENANCE
text
and decrease
key to confirm the data
.
symbol comes on
lit.
During the first Pyrolytic cycle,
unpleasant odours may occur due to
the normal evaporation of oily
manufacturing substances. This is an
absolutely normal phenomenon which
disappears after the first pyrolytic cycle.
During the Pyrolytic cycle the fans
produce a more intense level of noise
due to a greater rotation speed. This is
an absolutely normal operation,
intended to provide more effective heat
dispersal. At the end of the pyrolytic
cycle, the fans will continue to operate
for long enough to avoid overheating
the walls of adjacent units and the front
of the oven.
End of Pyrolytic function
At the end of the Pyrolytic function:
;
• the heating elements are deactivated;
• the flashing text
the display;
• a buzzer sounds, which can be switched off
by pressing any key on the display;
• the symbol
light switch off.
1. Turn the function knob to position 0 to exit
the function.
The symbol
the temperature inside the oven cavity returns to
safe levels (with the consequent deactivation of
the door lock).
2. Wait for the oven cavity to cool down.
3. After the
door and collect the residue deposited
inside the oven cavity with a damp
microfibre cloth.
We recommend wearing rubber gloves
for these operations.
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.
If the pyrolytic cycle gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time for
subsequent cleaning cycles.
appears on
and the thermostat indicator
on the display remains lit until
symbol switches off, open the
91477A143/A
Advertisement
Table of Contents
